Williams, ND: data center power outlook

Grid position at a glance

Serving utilities

BASIN ELECTRIC POWER COOP, BURKE-DIVIDE ELECTRIC COOP INC, LOWER YELLOWSTONE R E A, INC, MCKENZIE ELECTRIC COOP INC, MONTANA-DAKOTA UTILITIES CO, MOUNTRAIL-WILLIAMS ELEC COOP, OTTER TAIL POWER CO, SHERIDAN ELECTRIC COOP, INC, WAPA-- WESTERN AREA POWER ADMINISTRATION

ISO / market

SPP (Southwest Power Pool)

Highest grid access

345 kV

Substations in county

75

Industrial retail rate

7.5¢/kWhState-level EIA-861 industrial average. The map colours by this, not by a per-county rate.

Per-utility rates in county

8 of 9 serving utilities: 1.1 to 12.3¢/kWhLowest to highest industrial rate among the utilities serving this county (EIA-861 Sales to Ultimate Customers). A spread, not the county’s rate, and it covers only the serving utilities that report one.

Interconnection queue

None on record

Proposed generation

1,518 MW planned or under constructionUnits filed with EIA as planned or under construction (Form EIA-860M). Declared intent from the federal inventory, not the interconnection queue and not guaranteed capacity.

Grid carbon intensity

982 lb CO2/MWh

Water withdrawals

36 Mgal/dAll uses, freshwater. Water already withdrawn locally, not water available for a new load.

Construction labor near site

5,605 employed in construction within ~120 km (5 of 9 counties reporting)A large build needs hundreds of skilled construction workers on site for one to three years. A county with few of them within commuting range means bussing crews in, per diem, and housing, which is real cost and schedule risk. This counts people employed in construction within about a 120 km drive (BLS QCEW), summed across nearby counties. It is not labor known to be available: most are already committed to other projects, and no public data reveals who is free.

Grid conditions in Williams

The sections below set out what public data shows about siting a large electrical load in Williams, North Dakota. At 345 kV, Williams carries high-voltage transmission at its strongest mapped point. Williams contains 75 mapped substations, a dense footprint that spreads interconnection options across many points.

Wholesale activity over Williams clears through the SPP market (Southwest Power Pool), whose footprint sets how interconnection requests and capacity are handled. Williams carries the state industrial average retail rate of 7.5 cents per kWh from EIA-861, applied statewide. For Williams, the per-utility spread is 8 of 9 serving utilities: 1.1 to 12.3¢/kWh, which qualifies but never replaces the state average.

For Williams, North Dakota, no queued project appears in the feeds currently covered. In Williams, 1,518 MW is filed as planned or under construction in the federal EIA-860M inventory. In eGRID, the balancing authority over Williams shows 981.982 lb CO2 per MWh.

For Williams, the USGS 2015 compilation records 35.75 million gallons per day of all-use freshwater withdrawals, not water available to a new load. Williams sits within commuting range of roughly 5,605 construction workers (BLS QCEW, about 120 km), most already committed elsewhere.

Every figure for Williams here is screening-grade and describes the county as a whole, not any single parcel within it. None of the figures for Williams, North Dakota settles a site on its own; each one qualifies the others, and all of them come from public federal and state datasets. Settling a site in Williams, North Dakota requires a study of the specific parcel, a step beyond the county-level picture drawn here. Sources and data dates for Williams, North Dakota are logged directly below, so each figure on this page can be traced back to its public dataset.

Sources