Power by county

Wayne, KY: data center power outlook

The grid around Wayne, Kentucky is summarized here from public data, starting from the county's position in the PJM market (PJM Interconnection). Inside Wayne the mapped layer shows 16 mapped substations, with grid access reaching 161 kV at its strongest point. Retail service across Wayne is split among 3 utilities, among them EAST KENTUCKY POWER COOP, INC, SOUTH KENTUCKY RURAL E C C, VOLUNTEER ELECTRIC COOP.

Grid position at a glance

Serving utilities
EAST KENTUCKY POWER COOP, INC, SOUTH KENTUCKY RURAL E C C, VOLUNTEER ELECTRIC COOP
ISO / market
PJM (PJM Interconnection)
Highest grid access
161 kV
Substations in county
16
Industrial retail rate
7.0¢/kWhState-level EIA-861 industrial average. The map colours by this, not by a per-county rate.
Per-utility rates in county
1 of 3 serving utilities: 9.7¢/kWhLowest to highest industrial rate among the utilities serving this county (EIA-861 Sales to Ultimate Customers). A spread, not the county’s rate, and it covers only the serving utilities that report one.
Interconnection queue
None on record
Proposed generation
None on file (EIA-860M)Units filed with EIA as planned or under construction (Form EIA-860M). Declared intent from the federal inventory, not the interconnection queue and not guaranteed capacity.
Grid carbon intensity
716 lb CO2/MWh
Water withdrawals
3.6 Mgal/dAll uses, freshwater. Water already withdrawn locally, not water available for a new load.
Construction labor near site
15,055 employed in construction within ~120 km (33 of 45 counties reporting)A large build needs hundreds of skilled construction workers on site for one to three years. A county with few of them within commuting range means bussing crews in, per diem, and housing, which is real cost and schedule risk. This counts people employed in construction within about a 120 km drive (BLS QCEW), summed across nearby counties. It is not labor known to be available: most are already committed to other projects, and no public data reveals who is free.

Grid conditions in Wayne

The sections below set out what public data shows about siting a large electrical load in Wayne, Kentucky. Transmission-class access reaches 161 kV in Wayne at its strongest mapped point. Wayne contains 16 mapped substations, a moderate footprint spread across the service area.

Wholesale activity over Wayne clears through the PJM market (PJM Interconnection), whose footprint sets how interconnection requests and capacity are handled. Wayne carries the state industrial average retail rate of 7.0 cents per kWh from EIA-861, applied statewide. For Wayne, the per-utility spread is 1 of 3 serving utilities: 9.7¢/kWh, which qualifies but never replaces the state average.

For Wayne, Kentucky, no queued project appears in the feeds currently covered. No generation is filed as planned or under construction in Wayne, Kentucky in the federal EIA-860M inventory, a measured zero rather than missing data. In eGRID, the balancing authority over Wayne shows 716.09 lb CO2 per MWh.

For Wayne, the USGS 2015 compilation records 3.62 million gallons per day of all-use freshwater withdrawals, not water available to a new load. Wayne sits within commuting range of roughly 15,055 construction workers (BLS QCEW, about 120 km), most already committed elsewhere.

Every figure for Wayne here is screening-grade and describes the county as a whole, not any single parcel within it. None of the figures for Wayne, Kentucky settles a site on its own; each one qualifies the others, and all of them come from public federal and state datasets. Settling a site in Wayne, Kentucky requires a study of the specific parcel, a step beyond the county-level picture drawn here. Sources and data dates for Wayne, Kentucky are logged directly below, so each figure on this page can be traced back to its public dataset.

Sources