Power by county
Henry, KY: data center power outlook
The grid around Henry, Kentucky is summarized here from public data, starting from the county's position in the PJM market (PJM Interconnection). Inside Henry the mapped layer shows 8 mapped substations, with grid access reaching 765 kV at its strongest point. Retail service across Henry is split among 6 utilities, among them BLUE GRASS ENERGY COOP CORP, EAST KENTUCKY POWER COOP, INC, KENTUCKY UTILITIES CO.
Grid position at a glance
- Serving utilities
- BLUE GRASS ENERGY COOP CORP, EAST KENTUCKY POWER COOP, INC, KENTUCKY UTILITIES CO, LOUISVILLE GAS & ELECTRIC CO, OWEN ELECTRIC COOP INC, SHELBY ENERGY CO-OP, INC
- ISO / market
- PJM (PJM Interconnection)
- Highest grid access
- 765 kV
- Substations in county
- 8
- Industrial retail rate
- 7.0¢/kWhState-level EIA-861 industrial average. The map colours by this, not by a per-county rate.
- Per-utility rates in county
- 5 of 6 serving utilities: 6.1 to 8.4¢/kWhLowest to highest industrial rate among the utilities serving this county (EIA-861 Sales to Ultimate Customers). A spread, not the county’s rate, and it covers only the serving utilities that report one.
- Interconnection queue
- None on record
- Proposed generation
- 200 MW planned or under constructionUnits filed with EIA as planned or under construction (Form EIA-860M). Declared intent from the federal inventory, not the interconnection queue and not guaranteed capacity.
- Grid carbon intensity
- 716 lb CO2/MWh
- Water withdrawals
- 0.8 Mgal/dAll uses, freshwater. Water already withdrawn locally, not water available for a new load.
- Construction labor near site
- 110,062 employed in construction within ~120 km (50 of 59 counties reporting)A large build needs hundreds of skilled construction workers on site for one to three years. A county with few of them within commuting range means bussing crews in, per diem, and housing, which is real cost and schedule risk. This counts people employed in construction within about a 120 km drive (BLS QCEW), summed across nearby counties. It is not labor known to be available: most are already committed to other projects, and no public data reveals who is free.
Grid conditions in Henry
Read on for the public power picture of Henry in Kentucky, assembled for data center siting. At 765 kV, Henry carries extra-high-voltage transmission at its strongest mapped point. Henry contains 8 mapped substations, a moderate footprint spread across the service area.
Wholesale activity over Henry clears through the PJM market (PJM Interconnection), whose footprint sets how interconnection requests and capacity are handled. Henry carries the state industrial average retail rate of 7.0 cents per kWh from EIA-861, applied statewide. For Henry, the per-utility spread is 5 of 6 serving utilities: 6.1 to 8.4¢/kWh, which qualifies but never replaces the state average.
For Henry, Kentucky, no queued project appears in the feeds currently covered. In Henry, 200 MW is filed as planned or under construction in the federal EIA-860M inventory. In eGRID, the balancing authority over Henry shows 716.09 lb CO2 per MWh.
For Henry, the USGS 2015 compilation records 0.77 million gallons per day of all-use freshwater withdrawals, not water available to a new load. Henry sits within commuting range of roughly 110,062 construction workers (BLS QCEW, about 120 km), most already committed elsewhere.
Every figure for Henry here is screening-grade and describes the county as a whole, not any single parcel within it. None of the figures for Henry, Kentucky settles a site on its own; each one qualifies the others, and all of them come from public federal and state datasets. Settling a site in Henry, Kentucky requires a study of the specific parcel, a step beyond the county-level picture drawn here. Sources and data dates for Henry, Kentucky are logged directly below, so each figure on this page can be traced back to its public dataset.