Power by county

Boyle, KY: data center power outlook

Boyle sits in the PJM market (PJM Interconnection); what follows is the screening-grade grid picture for Boyle, Kentucky, drawn from public datasets. Counting from the mapped infrastructure, Boyle holds 18 mapped substations and reaches 138 kV. Boyle is covered by 3 retail service territories, including EAST KENTUCKY POWER COOP, INC, INTER COUNTY ENERGY COOP CORP, KENTUCKY UTILITIES CO.

Grid position at a glance

Serving utilities
EAST KENTUCKY POWER COOP, INC, INTER COUNTY ENERGY COOP CORP, KENTUCKY UTILITIES CO
ISO / market
PJM (PJM Interconnection)
Highest grid access
138 kV
Substations in county
18
Industrial retail rate
7.0¢/kWhState-level EIA-861 industrial average. The map colours by this, not by a per-county rate.
Per-utility rates in county
2 of 3 serving utilities: 7.1 to 7.5¢/kWhLowest to highest industrial rate among the utilities serving this county (EIA-861 Sales to Ultimate Customers). A spread, not the county’s rate, and it covers only the serving utilities that report one.
Interconnection queue
None on record
Proposed generation
None on file (EIA-860M)Units filed with EIA as planned or under construction (Form EIA-860M). Declared intent from the federal inventory, not the interconnection queue and not guaranteed capacity.
Grid carbon intensity
716 lb CO2/MWh
Water withdrawals
6.6 Mgal/dAll uses, freshwater. Water already withdrawn locally, not water available for a new load.
Construction labor near site
58,232 employed in construction within ~120 km (42 of 55 counties reporting)A large build needs hundreds of skilled construction workers on site for one to three years. A county with few of them within commuting range means bussing crews in, per diem, and housing, which is real cost and schedule risk. This counts people employed in construction within about a 120 km drive (BLS QCEW), summed across nearby counties. It is not labor known to be available: most are already committed to other projects, and no public data reveals who is free.

Grid conditions in Boyle

Below, Boyle in Kentucky is described from public data as a starting point for siting diligence. Boyle reaches 138 kV at its highest mapped voltage, a transmission class that can carry a substantial interconnection where capacity exists. With 18 substations mapped, Boyle has a moderate spread of interconnection points.

Boyle falls inside the PJM market (PJM Interconnection), which governs how its interconnection requests and capacity move. The rate for Boyle is the 7.0 cents per kWh state industrial average (EIA-861), the same figure the map colours by. Across Boyle, reported per-utility industrial rates cover 2 of 3 serving utilities: 7.1 to 7.5¢/kWh, offered only as context beneath the state figure.

No interconnection-queue project is on record for Boyle, Kentucky in the covered feeds, which reflects either genuine quiet or a queue not yet ingested. EIA-860M lists nothing planned or under construction for Boyle, Kentucky, which is a national filing and so a real zero. The balancing authority covering Boyle carries a grid carbon intensity of 716.09 lb CO2 per MWh in eGRID.

Reported freshwater withdrawals for all uses in Boyle are 6.6 million gallons per day in the USGS 2015 compilation, existing demand rather than water free for a new load. Around Boyle, some 58,232 people work in construction within about a 120 km commute (BLS QCEW), a measure of reach, not of available crews.

These numbers for Boyle are screening-grade context for the whole county, drawn from public data with the gaps left visible. Read the figures for Boyle, Kentucky together rather than one at a time: grid access matters less without substations near it, and a quiet queue reads differently inside an organized market than outside one. The next step for Boyle, Kentucky is an address-level interconnection study; the county figures here only narrow where to look. For Boyle, Kentucky, the source log below records where each figure comes from and when it was pulled, keeping the provenance visible.

Sources