Power by county
Tama, IA: data center power outlook
The grid around Tama, Iowa is summarized here from public data, starting from the county's position in the MISO market (Midcontinent Independent System Operator). Inside Tama the mapped layer shows 5 mapped substations, with grid access reaching 161 kV at its strongest point. Retail service across Tama is split among 8 utilities, among them CITY OF DYSART - (IA), CITY OF TRAER - (IA), CONSUMERS ENERGY.
Grid position at a glance
- Serving utilities
- CITY OF DYSART - (IA), CITY OF TRAER - (IA), CONSUMERS ENERGY, EAST-CENTRAL IOWA RURAL ELEC COOP, GRUNDY COUNTY RURAL ELEC COOP, INTERSTATE POWER AND LIGHT CO, MIDAMERICAN ENERGY CO, T I P RURAL ELECTRIC COOP
- ISO / market
- MISO (Midcontinent Independent System Operator)
- Highest grid access
- 161 kV
- Substations in county
- 5
- Industrial retail rate
- 7.2¢/kWhState-level EIA-861 industrial average. The map colours by this, not by a per-county rate.
- Per-utility rates in county
- 4 of 8 serving utilities: 6.0 to 8.4¢/kWhLowest to highest industrial rate among the utilities serving this county (EIA-861 Sales to Ultimate Customers). A spread, not the county’s rate, and it covers only the serving utilities that report one.
- Interconnection queue
- 5 projects, 730 MW
- Proposed generation
- None on file (EIA-860M)Units filed with EIA as planned or under construction (Form EIA-860M). Declared intent from the federal inventory, not the interconnection queue and not guaranteed capacity.
- Grid carbon intensity
- 982 lb CO2/MWh
- Water withdrawals
- 5.7 Mgal/dAll uses, freshwater. Water already withdrawn locally, not water available for a new load.
- Construction labor near site
- 50,515 employed in construction within ~120 kmA large build needs hundreds of skilled construction workers on site for one to three years. A county with few of them within commuting range means bussing crews in, per diem, and housing, which is real cost and schedule risk. This counts people employed in construction within about a 120 km drive (BLS QCEW), summed across nearby counties. It is not labor known to be available: most are already committed to other projects, and no public data reveals who is free.
Grid conditions in Tama
Read on for the public power picture of Tama in Iowa, assembled for data center siting. Transmission-class access reaches 161 kV in Tama at its strongest mapped point. Across Tama, Iowa, the mapped layer holds just 5 substations, so options gather at a handful of places.
Wholesale activity over Tama clears through the MISO market (Midcontinent Independent System Operator), whose footprint sets how interconnection requests and capacity are handled. Tama carries the state industrial average retail rate of 7.2 cents per kWh from EIA-861, applied statewide. For Tama, the per-utility spread is 4 of 8 serving utilities: 6.0 to 8.4¢/kWh, which qualifies but never replaces the state average.
Tama carries 5 projects in the interconnection queue, totalling 730.4 MW of requested capacity. The federal EIA-860M inventory files no planned or under-construction generation in Tama, Iowa, a real zero rather than a gap. In eGRID, the balancing authority over Tama shows 981.982 lb CO2 per MWh.
For Tama, the USGS 2015 compilation records 5.65 million gallons per day of all-use freshwater withdrawals, not water available to a new load. Tama sits within commuting range of roughly 50,515 construction workers (BLS QCEW, about 120 km), most already committed elsewhere.
Every figure for Tama here is screening-grade and describes the county as a whole, not any single parcel within it. None of the figures for Tama, Iowa settles a site on its own; each one qualifies the others, and all of them come from public federal and state datasets. Settling a site in Tama, Iowa requires a study of the specific parcel, a step beyond the county-level picture drawn here. Sources and data dates for Tama, Iowa are logged directly below, so each figure on this page can be traced back to its public dataset.