Power by county
Harrison, IN: data center power outlook
Harrison sits in the MISO market (Midcontinent Independent System Operator); what follows is the screening-grade grid picture for Harrison, Indiana, drawn from public datasets. Counting from the mapped infrastructure, Harrison holds 24 mapped substations and reaches 765 kV. Harrison is covered by 5 retail service territories, including DUKE ENERGY INDIANA, LLC, HARRISON COUNTY RURAL E M C, JACKSON COUNTY RURAL E M C - (IN).
Grid position at a glance
- Serving utilities
- DUKE ENERGY INDIANA, LLC, HARRISON COUNTY RURAL E M C, JACKSON COUNTY RURAL E M C - (IN), LOUISVILLE GAS & ELECTRIC CO, MEADE COUNTY RURAL E C C
- ISO / market
- MISO (Midcontinent Independent System Operator)
- Highest grid access
- 765 kV
- Substations in county
- 24
- Industrial retail rate
- 8.9¢/kWhState-level EIA-861 industrial average. The map colours by this, not by a per-county rate.
- Per-utility rates in county
- 3 of 5 serving utilities: 7.9 to 11.4¢/kWhLowest to highest industrial rate among the utilities serving this county (EIA-861 Sales to Ultimate Customers). A spread, not the county’s rate, and it covers only the serving utilities that report one.
- Interconnection queue
- 1 projects, 200 MW
- Proposed generation
- None on file (EIA-860M)Units filed with EIA as planned or under construction (Form EIA-860M). Declared intent from the federal inventory, not the interconnection queue and not guaranteed capacity.
- Grid carbon intensity
- 982 lb CO2/MWh
- Water withdrawals
- 3.6 Mgal/dAll uses, freshwater. Water already withdrawn locally, not water available for a new load.
- Construction labor near site
- 58,548 employed in construction within ~120 km (47 of 52 counties reporting)A large build needs hundreds of skilled construction workers on site for one to three years. A county with few of them within commuting range means bussing crews in, per diem, and housing, which is real cost and schedule risk. This counts people employed in construction within about a 120 km drive (BLS QCEW), summed across nearby counties. It is not labor known to be available: most are already committed to other projects, and no public data reveals who is free.
Grid conditions in Harrison
Everything here about Harrison, Indiana comes from public federal and state records, with the gaps left visible. Harrison reaches 765 kV, an extra-high-voltage class, at its strongest mapped point of grid access. With 24 substations mapped, Harrison offers interconnection points across many locations.
Harrison falls inside the MISO market (Midcontinent Independent System Operator), which governs how its interconnection requests and capacity move. The rate for Harrison is the 8.9 cents per kWh state industrial average (EIA-861), the same figure the map colours by. Across Harrison, reported per-utility industrial rates cover 3 of 5 serving utilities: 7.9 to 11.4¢/kWh, offered only as context beneath the state figure.
Harrison has 1 interconnection-queue project on record, totalling 200 MW of requested capacity. Nothing is on file for Harrison, Indiana in EIA-860M as planned or under construction, which counts as a measured zero. The balancing authority covering Harrison carries a grid carbon intensity of 981.982 lb CO2 per MWh in eGRID.
Reported freshwater withdrawals for all uses in Harrison are 3.55 million gallons per day in the USGS 2015 compilation, existing demand rather than water free for a new load. Around Harrison, some 58,548 people work in construction within about a 120 km commute (BLS QCEW), a measure of reach, not of available crews.
These numbers for Harrison are screening-grade context for the whole county, drawn from public data with the gaps left visible. Read the figures for Harrison, Indiana together rather than one at a time: grid access matters less without substations near it, and a quiet queue reads differently inside an organized market than outside one. The next step for Harrison, Indiana is an address-level interconnection study; the county figures here only narrow where to look. For Harrison, Indiana, the source log below records where each figure comes from and when it was pulled, keeping the provenance visible.