Power by county

Kane, IL: data center power outlook

For Kane, Illinois, the public grid picture begins with its place in the PJM market (PJM Interconnection) and the infrastructure mapped inside the county. Grid access across Kane tops out at 345 kV, over a footprint of 25 mapped substations. In Kane, 6 utilities share the retail territory, among them AMEREN ILLINOIS COMPANY, CITY OF BATAVIA - (IL), CITY OF GENEVA- (IL).

Grid position at a glance

Serving utilities
AMEREN ILLINOIS COMPANY, CITY OF BATAVIA - (IL), CITY OF GENEVA- (IL), CITY OF ST CHARLES - (IL), COMMONWEALTH EDISON CO, ROCK ENERGY COOPERATIVE
ISO / market
PJM (PJM Interconnection)
Highest grid access
345 kV
Substations in county
25
Industrial retail rate
10.1¢/kWhState-level EIA-861 industrial average. The map colours by this, not by a per-county rate.
Per-utility rates in county
6 serving utilities: 1.6 to 10.8¢/kWhLowest to highest industrial rate among the utilities serving this county (EIA-861 Sales to Ultimate Customers). A spread, not the county’s rate, and it covers only the serving utilities that report one.
Interconnection queue
None on record
Proposed generation
12 MW planned or under constructionUnits filed with EIA as planned or under construction (Form EIA-860M). Declared intent from the federal inventory, not the interconnection queue and not guaranteed capacity.
Grid carbon intensity
716 lb CO2/MWh
Water withdrawals
70 Mgal/dAll uses, freshwater. Water already withdrawn locally, not water available for a new load.
Construction labor near site
204,227 employed in construction within ~120 km (23 of 24 counties reporting)A large build needs hundreds of skilled construction workers on site for one to three years. A county with few of them within commuting range means bussing crews in, per diem, and housing, which is real cost and schedule risk. This counts people employed in construction within about a 120 km drive (BLS QCEW), summed across nearby counties. It is not labor known to be available: most are already committed to other projects, and no public data reveals who is free.

Grid conditions in Kane

This page gathers the public grid evidence for Kane, Illinois that bears on a large new load. The highest mapped voltage in Kane is 345 kV, in the high-voltage transmission class. Kane carries 25 substations, a dense footprint across the county.

For Kane, the PJM market (PJM Interconnection) is the operator that handles interconnection and capacity. The state industrial average retail rate is 10.1 cents per kWh, drawn from EIA-861 and applied to Kane at the state level rather than as a county rate. The serving utilities in Kane that publish a rate range 6 serving utilities: 1.6 to 10.8¢/kWh, a spread kept separate from the state average.

Kane, Illinois shows no interconnection-queue project in the covered feeds, whether from real quiet or a feed not yet loaded. Federal filings (EIA-860M) list 11.9 MW of generation as planned or under construction in Kane. Grid carbon intensity for Kane, via its balancing authority, is 716.09 lb CO2 per MWh in eGRID.

USGS 2015 puts freshwater withdrawals across Kane at 69.59 million gallons per day for all uses, a measure of use, not spare supply. Within roughly a 120 km commute of Kane, about 204,227 people are employed in construction (BLS QCEW), which speaks to how far crews for a multi-year build would travel, not to labour known to be free.

Read the Kane figures as screening-grade context: they describe the surrounding grid, not a specific parcel. The numbers for Kane, Illinois qualify one another, so grid access, substation density, market membership, and rate are meant to be read as a set, not in isolation. Past this screening view, siting in Kane, Illinois turns on a study of a particular address, something no county-level page can stand in for. Every number shown for Kane, Illinois traces to a public source listed below, with its retrieval date, so the provenance is auditable rather than asserted.

Sources